Water hardness in Dallas, TX: grains, ppm, and what to do
Dallas tap water is 120 to 155 mg/L hard, about 7.0 to 9.1 grains per gallon, per Dallas Water Utilities. What that means and what to do.
Short answer: Dallas tap water is hard. Dallas Water Utilities (DWU) puts it at 120 to 155 mg/L as calcium carbonate, which works out to about 7.0 to 9.1 grains per gallon.
The Dallas hardness figure, and where it comes from
The City of Dallas answered this question directly in a memo from Dallas Water Utilities to the City Council’s Quality of Life, Arts and Culture Committee:
“Do we have hard water? Yes. Dallas’ water hardness ranges from 120 to 155 mg/L as CaCo3.”
- Source: City of Dallas memorandum, “Community Water Fluoridation in Dallas, Texas Follow Up,” dated December 1, 2023 (PDF on dallascityhall.com)
- Figure: 120 to 155 mg/L as CaCO3 (a range, with no average given)
- Year: 2023 (memo date)
- Accessed: November 18, 2026
Important: the City of Dallas 2025 Water Quality Report (its Consumer Confidence Report, accessed November 18, 2026) does not list a hardness figure. We read it and found no hardness line. That is why this page uses the 2023 DWU memo, the most recent hardness figure we found published by the city itself.
Dallas hardness in grains per gallon (the math)
Water softeners and test strips usually use grains per gallon (gpg). Water reports use mg/L, which is the same as ppm. The conversion is 17.1 mg/L = 1 grain per gallon.
| mg/L (ppm) as CaCO3 | Math | Grains per gallon | |
|---|---|---|---|
| Low end | 120 | 120 ÷ 17.1 | 7.0 gpg |
| High end | 155 | 155 ÷ 17.1 | 9.1 gpg |
So Dallas water is about 7.0 to 9.1 grains per gallon (rounded to one decimal).
Is that hard? The USGS scale
The U.S. Geological Survey classifies water hardness like this (USGS Water Science School, “Hardness of Water”, accessed November 18, 2026):
| USGS class | mg/L as calcium carbonate |
|---|---|
| Soft | 0 to 60 |
| Moderately hard | 61 to 120 |
| Hard | 121 to 180 |
| Very hard | more than 180 |
The low end of Dallas’s range (120 mg/L) sits right at the top of moderately hard. The high end (155 mg/L) is hard. In plain terms, Dallas water is moderately hard to hard.
Where Dallas water comes from (and why there is a range)
The same 2023 memo says Dallas draws from six surface water reservoirs. The East Side plant in Sunnyvale takes water from Lakes Ray Hubbard, Tawakoni, and Fork. The Elm Fork and Bachman plants take water from Lakes Ray Roberts, Lewisville, and Grapevine. The city publishes one range, not a figure per plant or per neighborhood. Different lakes feeding different plants may help explain the range, but the city does not say that, so treat it as a guess.
Your tap may differ. If your water bill comes from a different city or utility, check that utility’s own report instead.
What hard water at 7 to 9 gpg usually means at home
Hardness is calcium and magnesium dissolved in the water. At this level, people commonly notice:
- White, chalky spots on glasses, faucets, and shower doors
- Crusty buildup on showerheads and faucet aerators
- Scale inside kettles, coffee makers, and water heaters
- Soap and shampoo that lather less
This page makes no health claims. Hardness is an aesthetic and plumbing issue in the sources cited here.
What to do: start cheap, step up only if needed
1. Clean scale with vinegar (free to a few dollars). Soak showerheads and faucet aerators in white vinegar, and wipe glass shower doors with it. For many Dallas homes at 7 to 9 gpg, this plus regular wiping is enough.
2. Descale appliances on schedule. Follow your kettle, coffee maker, and dishwasher manuals for descaling. Flush your water heater as its manual recommends.
3. Test your own tap before buying anything. The city range is a system-wide figure, not your house. An inexpensive hardness test kit or strip gives you your own number in grains per gallon.
4. Consider a shower filter only for the right reason. Most shower filters are sold to reduce chlorine. Check the product’s own spec sheet before assuming it reduces hardness, and be skeptical of vague claims.
5. Consider a water softener if:
- Scale comes back within days of cleaning
- Your water heater or tankless unit is scaling up
- Your own test reads at or above the high end of the city range
- You simply want spot-free glass and fixtures and are fine with the upkeep (salt refills and regeneration)
A softener should be sized to your measured hardness and your household’s water use. Ask any installer to show you that math in writing.
Check your own water report
If you want to read the city’s report yourself, our guide shows what to look for in ten minutes: How to read your city water quality report (CCR).
Sources
- City of Dallas, Dallas Water Utilities memorandum, December 1, 2023, “Community Water Fluoridation in Dallas, Texas Follow Up.” PDF. Accessed November 18, 2026.
- City of Dallas, 2025 Water Quality Report (no hardness figure listed). PDF. Accessed November 18, 2026.
- U.S. Geological Survey, Water Science School, “Hardness of Water.” usgs.gov. Accessed November 18, 2026.
Questions
How hard is Dallas tap water?
Dallas Water Utilities says its water hardness ranges from 120 to 155 mg/L as calcium carbonate (memo dated December 1, 2023). That is about 7.0 to 9.1 grains per gallon.
Is Dallas water hard or soft?
Hard. Dallas Water Utilities answered the question 'Do we have hard water?' with 'Yes.' On the USGS scale, 120 mg/L is moderately hard and 155 mg/L is hard.
Why can't I find hardness in the Dallas water quality report?
The City of Dallas 2025 Water Quality Report does not list a hardness figure. The range on this page comes from a separate Dallas Water Utilities memo to a City Council committee.
Do I need a water softener in Dallas?
Not always. At 7 to 9 grains per gallon, many homes manage with regular descaling. A softener makes more sense if scale is building up quickly on your water heater, fixtures, or glass shower doors.
Published November 18, 2026 · Updated November 18, 2026.